MOTIV controls | Guide TEST

Parameters

Control name	Parameter	Description
MOTIV Sense3	Number of pages	Each page can contain up to 3 controls. Swipe left/right on the device to select a page.
	LED presence behaviour	Set the behaviour of the LEDs: Always ON Always OFF On at distance: the LEDs turn on when you are at 3 m from the device On when close: the LEDs turn on when you are at 1 m from the device
	Temperature calibration offset	Calibration of the temperature sensor, from -6 °C to 6 °C, in increments of 0,5 °C
	Display brightness	Set the brightness of the top display: Low Medium High

All other Motiv controls in de the software have no parameters.

The settings below can be configured according to the control or device, as well as the basic actions and routines you create.

Control name	Setting	Description
MOTIV Sense3	Short name displayed on Sense3	Name shown on the top display (8 - 13 characters, depending on the width of the characters)
When active When inactive	Set the LED colour and the LED brightness of the feedback LED when the basic action or routine is active or inactive.
Operating mode	Set the operating mode: Short press: activate the basic action or routine by briefly pressing the button. Press and hold: activate the basic action or routine by holding down the button. Set the Duration. Push-button mode: activate the basic action or routine for as long as you keep the button pressed.

Control name

Setting

Description

MOTIV Sense3

Short name displayed on Sense3

Name shown on the top display (8 - 13 characters, depending on the width of the characters)

Set the LED colour and the LED brightness of the feedback LED when the basic action or routine is active or inactive.

Set the operating mode:

Short press: activate the basic action or routine by briefly pressing the button.
Press and hold: activate the basic action or routine by holding down the button. Set the Duration.
Push-button mode: activate the basic action or routine for as long as you keep the button pressed.