Description
This Zigbee® switch allows you to operate lighting circuits.
You can perfectly install this smart switch in new construction projects and use it to replace a conventional switch in renovation projects without cutting, grinding or adding electrical wires. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching.
The connected double switch, Zigbee® operates in 2 modes: stand-alone and connected mode.
In stand-alone mode, it is not connected to a wireless bridge (550-00640) or smart hub (552-00001) and works autonomously with a toggle function. No configuration is needed.
In connected mode, it is connected to a wireless bridge (550-00640) or smart hub (552-00001) via an integrated wireless transmitter and receiver. You can enable the following functions with the Niko Home Control programming software or the Niko Home app:
-
Add the connected switch to a scene or all-off function
-
Control additional lighting circuits (apart from the one wired to the connected Zigbee® switch)
-
Link it to a warning (all-on) function, routines, calendar or scheduling functions
-
Enable, disable or invert the feedback LED
-
Control the connected switch via the Niko Home Control touchscreen (550-20102), Digital black® (550-1800x, 551-1800x) or remotely via a smart device with the Niko Home app
When connected to your Niko Home Control installation, the connected switch, Zigbee® will automatically be upgraded to the latest firmware version.
Overview
There are 4 mechanical variants, which fit most European wall-mounting boxes.
More details can be found under Installation. Select the desired variant based on the fixing method and the desired vertical centre distance if you install a multifold wall-mounting box.
Required Parts
Double connected switch, Zigbee®
A complete connected double switch, Zigbee® consists of the following parts:
-
1 base
Choose one from the table below:
|
Article number |
Description |
|---|---|
|
Double connected switch, Zigbee®, 60 x 71 mm, claw fixing |
|
|
Double connected switch, Zigbee®, 60 x 71 mm, screw fixing |
|
|
Double connected switch, Zigbee®, 71 x 71 mm, screw fixing |
|
|
Double connected switch, Zigbee®, 71 x 71 mm, claw fixing |
-
1 central plate
Choose one from the table below:
|
Article number |
Description |
|---|---|
|
This finishing set for an electronic switch or push button is fitted with a transparent lens. The feedback LED underneath lights up when the switch or push button is active.
|
|
|
This finishing set for an electronic switch or push button does not contain a transparent lens. As a result, the feedback LED underneath the finishing set is invisible. |
Note that xxx represents the colour.
-
1 faceplate
The connected switch is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Optional Parts
Paint protection cap
Optionally, you can order a paint protection cap (170-00099) to cover the connected double switch, Zigbee® during painting work. With it, you avoid getting paint spatters on your switching materials.
Double push-button extension
If you wish, you can attach one or more double push buttons to the extension terminals of the double connected switch, Zigbee®.
A complete double push-button extension consists of the following parts:
-
1 base
The following optional double push-button bases can be connected to the extension terminal of a double connected switch, Zigbee®:
|
Article number |
Centre-to-centre distance |
Wire connection |
Fixing method |
|---|---|---|---|
|
60 x 71 mm |
Plug-in terminals |
Claw fixing |
|
|
60 x 71 mm |
Plug-in terminals |
Screw fixing |
|
|
60 x 71 mm |
Screw terminals |
Claw fixing |
|
|
60 x 71 mm |
Screw terminals |
Screw fixing |
|
|
71 x 71 mm |
Plug-in terminals |
Claw fixing |
|
|
71 x 71 mm |
Plug-in terminals |
Screw fixing |
|
|
71 x 71 mm |
Screw terminals |
Claw fixing |
|
|
71 x 71 mm |
Screw terminals |
Screw fixing |
-
1 central plate
Note that xxx represents the colour.
-
1 faceplate
The connected switch, Zigbee® is compatible with all faceplates from the Niko range. For more information, consult our Finishings website page.
Control
Technical data
Dimensions
|
Article number |
||||
|---|---|---|---|---|
|
Fixation type |
Claw |
Screw |
Screw |
Claw |
|
Front view, dimensions |
|
|
|
|
|
Side view, dimensions |
|
|
|
|
|
Suited for a multifold wall-mounting box with vertical centre distance |
60 mm |
71 mm |
||
|
Suited for a multifold wall-mounting box with horizontal centre distance |
71 mm |
71 mm |
||
Load Table
Below table gives an overview of the permitted loads at an ambient temperature of 40°C.
Specifications
|
Specification |
Value |
|
|---|---|---|
|
Article number |
552-721X2 |
|
|
EAN 552-72102 |
5413736368026
|
|
|
EAN 552-72122 |
5413736368446
|
|
|
EAN 552-72112 |
5413736368408
|
|
|
EAN 552-72132 |
5413736385481
|
|
|
Maximum load per channel |
1 x 10 A |
|
|
Maximum load both channels |
Max. 16 A (1 x 10 A + 1 x 6 A) |
|
|
Power supply |
230 Vac ± 10%, 50 Hz |
|
|
Stand-by power |
0.46 W |
|
|
Circuit Breaker |
Maximum MCB rating C16* |
|
|
Max. inrush current |
100 A |
|
|
Wire capacity |
1 x 2.5 mm2 |
|
|
Protocol |
Zigbee® 3.0, 2.4 GHz |
|
|
Mounting method |
Flush-mounting box |
|
|
Flush-mounting box specifications (also see the below image) |
|
|
|
|
A. Depth |
Min. 40 mm (cabling space included) |
|
B. Claw/screw fixing |
60 mm |
|
|
C. Inner diameter box |
60 mm |
|
|
D. Multifold boxes centre distance horizontal |
71 mm* |
|
|
E. Multifold boxes centre distance vertical |
71 mm* |
|
|
F. Multifold boxes centre distance vertical for BE and FR |
60 mm* |
|
|
Mounting height |
110 - 120 cm |
|
|
Modification of settings |
|
|
|
|
Stand-alone mode |
Buttons on front panel, behind the central plate |
|
Connected mode |
Niko Home Control programming software Niko Home app |
|
|
Max cable length extension switches |
50 m |
|
|
Maximum range (between switch and smart hub or wireless bridge) |
10 m (Longer ranges possible with the mesh networking capability of 230 V connected Zigbee® devices) |
|
|
Maximum per installation |
Max. 50 connected Zigbee® devices |
|
|
Operating frequency |
2.4 GHz |
|
|
Maximum RF power |
10 dBm |
|
|
Protection degree |
IP20 |
|
|
Ambient temperature |
0 – 40 °C |
|
|
Dimensions (HxWxD) |
||
|
Weight |
70 g |
|
|
Marking |
CE, Zigbee® |
|
|
* To be installed in accordance with the national regulations |
||
