Description
The connected motor control contains a switching contact to control a 230V motor. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control.
You can use the connected motor control to replace a conventional motor control.
The connected motor control can switch its own contacts.
With the addition of the wireless smart hub for Niko Home Control, it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a mood or all-off function.
Overview
551-723x1
Control
Wiring
Switch off the mains.
Installation
Dismantling
Switch off the mains.
Settings
In an installation without a wireless smart hub, the switch will control the wired motor. The run time wil be set to 90 s. More advanced options become available if you use a wireless smart hub and the Niko Home Control programming software.
Reset
You can watch the tutorial here:
Technical data
Dimensions in mm
|
|
|
|
|
551-72301 |
551-72321 |
551-72311 |
Specifications
|
Specification |
Value |
|---|---|
|
Article number |
551-723x1 |
|
Power supply |
230 Vac |
|
Protocol |
Proprietary |
|
Mounting method |
Wall mounting |
|
Mounting height |
110 - 120 cm |
|
Weight |
70 g |
|
Ambient temperature |
0 - 40 °C |
|
Dimensions (HxWxD) - 551-72301, 551-72321 |
71.5 x 73 x 40 mm |
|
Dimensions (HxWxD) - 551-721311 |
73 x 73 x 40 mm |
|
Protection degree |
IP20 |
|
Modification of settings |
Niko Home Control programming software (requires wireless smart hub 552-0000x) |
|
Maximum range (from switch to wireless smart hub) |
30 m |
|
Operating frequency |
869.05 MHz |
|
Maximum frequency power |
6 dBm |
|
Wire capacity |
2 x 2.5 mm2 |
|
Marking |
CE |