Niko Home Control is evolving into MOTIV Building Control. MOTIV is a new brand for intelligent building automation. Built on the trusted foundation of Niko Home Control, MOTIV solutions are designed to make buildings work more naturally for the people inside them. MOTIV helps professionals create smarter, more comfortable buildings. With technology that works quietly in the background. All existing Niko Home Control solutions remain fully compatible with MOTIV. Over time, the full portfolio will move to the MOTIV brand. During this transition, you will see both Niko Home Control (NHC) and MOTIV Building Control (MBC) appear in this documentation. Discover MOTIV at niko.eu/MOTIV
Hardware Manual
English Danish Dutch French German Slovak Swedish
Hardware Manual
English Danish Dutch French German Slovak Swedish
Breadcrumbs

LED behaviour smart hub


Switch on the mains.


Green LED flashing
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-013.png

The smart hub is connected to your home network but has no internet connection

See Maintenance and troubleshooting

Green LED continuously on
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-014.png

The smart hub has started up and is connected to the internet

Your smart hub is working fine and your installation can be controlled remotely with the app

Red LED flashing
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-015.png

The smart hub is not connected to your home network and is trying to reconnect (if a network was already configured)

See Maintenance and troubleshooting

Red LED continuously on
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-016.png

The smart hub is malfunctioning

Contact Niko customer services

Blue LED flashing
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-011.png

The smart hub is getting ready for a reset

See Maintenance and troubleshooting > Reset

Blue LED breathing
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-017.png

The smart hub is starting up or upgrading

Wait until the LED has stopped flashing.
Do not cut the power

Blue LED continuously on
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-012.png

The smart hub is being reset

See Maintenance and troubleshooting > Reset

LED off
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-00001-018.png

There is no mains voltage

Check the mains voltage

The smart hub or its power supply
is faulty

If the problem persists, contact Niko customer
services