Niko Home Control is evolving into MOTIV Building Control. MOTIV is a new brand for intelligent building automation. Built on the trusted foundation of Niko Home Control, MOTIV solutions are designed to make buildings work more naturally for the people inside them. MOTIV helps professionals create smarter, more comfortable buildings. With technology that works quietly in the background. All existing Niko Home Control solutions remain fully compatible with MOTIV. Over time, the full portfolio will move to the MOTIV brand. During this transition, you will see both Niko Home Control (NHC) and MOTIV Building Control (MBC) appear in this documentation. Discover MOTIV at niko.eu/MOTIV
Hardware Manual
English Danish Dutch French German Slovak Swedish
Hardware Manual
English Danish Dutch French German Slovak Swedish
Breadcrumbs

Manual use of the connected single switch, Zigbee®

Configuration

The connected switch, Zigbee® works autonomously with a toggle function and does not require configuration. If you press the button, it will switch its own contact and activate the corresponding lighting circuit. Press the button again to switch off the built-in contact. The state of the built-in contact is visualised by a feedback LED, which can be disabled manually by pressing the PROG button for 10 seconds.

A connected switch, Zigbee® that is used in stand-alone mode will not use the mesh networking capability and will not be upgraded automatically. For more details, refer to Zigbee® network principle.

Feedback LED

Disable the white feedback LED

  • The white feedback LED is active by default

  • Press the PROG button for 10 seconds

  • The blue LED turns ON after 2 seconds and subsequently turns OFF after 10 seconds

  • The white LED is disabled

Enable the white feedback LED (after it has been disabled)

  • Press the PROG button for 10 seconds

  • The blue LED turns ON after 2 seconds and subsequently turns OFF

  • The white LED lights up again when the connected switch, Zigbee® is used
https://s3-eu-west-1.amazonaws.com/guideimages/HWScreenshots/V2.0/EN/PM552-721x1-017.png

Stand-alone use

See Connected single switch, Zigbee®, 10 A