Adjusting the device settings of a video unit

Starting point

• You created an external video unit. A lock and a chime are optional.

• You created an access control routine.

• You are connected to the installation.

• You addressed the video unit.

• You are in the Create overview window.
  

Procedure

1. Click on the external video unit.
   Result: The pane with the information appears. 
   

2. Under Device Settings, move the slider of the setting you want to adjust to the left or to the right to lower or raise the value.
   The settings apply to the entire device, not to a specific button.
   The new settings are automatically uploaded to the video unit.
   You can adjust the following settings:

   Setting	Description	Example	Default value
   button sensitivity	To adjust how hard/soft you have to press the button to trigger a call.	Lower the setting when the vibration of the door, being closed near the video unit, triggers a call.	90
   speaker volume	To adjust the volume of the speaker of the video unit (outside).	Raise the setting when there is a lot of noise in front of the house, e.g. heavy traffic.	110
   ringtone volume	To adjust the ringtone volume of the video unit (outside) when a call is triggered.	Lower the setting if your neighbour complains about the sound of the tone.	2
   microphone sensitivity	To adjust the outside microphone to pick up ambient noise. In doing so, you adjust the volume inside.	Lower the setting when there is heavy traffic on the street.	65