Starting point
-
You have an installation with a connected controller.
-
You have opened the Diagnostics page.
-
You are on the Bus communication tab.
Description of the Bus communication tab
The Bus communication tab provides a status overview of the bus communication based on the following components.
|
Ref |
Component |
Description |
|---|---|---|
|
A |
Live tracing |
Live monitoring of new bus messages |
|
B |
History log |
Logbook of all bus messages of the past 3 to 7 days |
|
C |
Search |
Search function to find bus messages |
|
D |
Message list |
The messages from the live tracing or history log |
The following automated messages are not displayed:
-
time stamps
-
temperature measurements
-
analogue sensor measurements
-
energy measurements
For example, wind measurements of sunblinds are not logged.
If a measurement starts a basic action or routine (e.g. the wind picks up causing the sunblinds to be raised), that basic action or routine is logged.
Search
A few examples of search terms:
-
the name of a control or a device as entered in the programming software
-
the address of a control or a module
-
a room
Message list
The message list contains the following information.
|
Ref |
Component and description |
|---|---|
|
A |
Date and time of the bus message |
|
B |
Control/device indication:
|
|
C |
Name of the control or the device as entered in the programming software |
|
D |
Description of the bus message |
|
E |
Address of the control or the module: refers to the control or the module |
|
F |
Room where the control or device is located (as entered in the programming software) |